Wolf Hood Filter Indicator
On the panel
It depends which Wolf canopy is overhead. A cooktop hood lights a filter symbol after roughly thirty hours of running; a V Series stainless or glass hood nearer one hundred; black glass shows FG.
A filter indicator is a running-time counter with a lamp on the end of it. It totals how long the blower has turned and lights at a fixed number; nothing inspects a filter. Wolf Repair Service Denver treats the lamp as a reminder and the baffle as evidence.
How to read it
Normal · Watch · Call
| Reading | What it looks like |
|---|---|
| Normal The appliance behaving as designed | The lamp arriving on schedule above filters that still look clean. Running time and grease seldom agree. |
| Watch Worth noting, not worth a visit yet | Baffles heavy enough to drip or rattle before any lamp appears. The counter's assumption about this kitchen was wrong. |
| Call Stop and book the diagnosis | An indicator that will not clear after the reset published for that model, or one that returns within a day of clearing. |
What you can check yourself
- Wash the filters before touching the reset. Clearing the counter is the last step, never the repair.
- Use the sequence Wolf publishes for your canopy: a Filter button on the cooktop module, a press and hold on the V Series icon, or Delay held until FF appears.
- Read FG as a filter reminder, not F6. Wolf states plainly that no F6 code exists here.
- Stop there. Anything behind a panel, a sealed burner or a gas fitting is the visit, not the evening: Wolf Repair Service Denver, (303) 801-0060.
What the visit consists of
Where a lamp will not clear, the visit goes to the control module and its ribbon, since counter and reset live on one board. A reminder returning after a clean reset points there rather than at the filters.
What it costs to put right
A ventilation control module is not one of the six bands quoted in advance here, so it is priced after the diagnosis. The service call is $89 flat. It buys the trip and a finished diagnosis, and it comes off the repair price the moment you say go ahead.
Why it happens in Denver kitchens
Thirty hours and one hundred are very different schedules, and a remodelled kitchen here often carries a canopy of one Wolf generation over a rangetop of another. Neither counter knows what was cooked.
Follow-up questions
How often should the filters really come out?
Wolf answers twice. The pro hood guide sets three to six months; the company's own cleaning answer says roughly monthly, and sooner for frying or wok work. Take the shorter figure if the kitchen earns it. The indicator is a calendar; the baffle you are holding is the measurement.
The light came back the next day. Is that a fault?
Most often the reset never took. Each Wolf canopy clears its reminder differently, and holding the wrong key just cycles the display. Try the sequence published for that exact model with the blower off. If it returns after a reset that clearly worked, the control module is next.
Signed
Desmond Achebe
- Bench
- Cooking-appliance technician — controls and fault codes
- Years on the tools
- 11 years in the trade
- Reading here
- Reading: hood lights and indicators
$89 service call
Give the model number and what the panel is doing.
Those two facts settle most of this on the phone. Wolf Repair Service Denver answers 24/7 on (303) 801-0060; the $89 visit fee comes off the repair once you approve it.